+高级检索
打磨作业场所多尘源耦合扩散规律研究
DOI:
作者:
作者单位:

1.北京科技大学 土木与资源工程学院;2.中国安全生产科学研究院;3.北京科技大学

作者简介:

通讯作者:

基金项目:

国家重点研发计划(2016YFC0801700),中国安全生产科学研究院基本科研业务费专项资金项目(2019JBKY04、2019JBKY11)


Study on Coupling Diffusion Law of Multi-dust Sources in Grinding Workplace
Author:
Affiliation:

1.School of Civil and Resource Engineering,University of Science and Technology Beijing;2.China Academy of Safety Science and Technology;3.University of Science and Technology Beijing

Fund Project:

The National key research and Development program of China (2016YFC0801700), The basic research funding of China Academy of Safety Science and Technology (2019JBKY04、2019JBKY11)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    为了改善移动打磨作业场所粉尘浓度超标的现状,以中车长客打磨车间为研究背景,利用高斯扩散模型,建立了非稳态单尘源粉尘扩散模型,并采用线性回归的方法,研究了多尘源耦合扩散规律;根据实验测定的不同高度单点和多点打磨的粉尘浓度,结合气溶胶粒子的运动方程和梯度下降法,求解出了粒子扩散系数和多尘源耦合系数;并将得到的粉尘扩散模型与对照实验进行验证。结果显示,多点打磨在两个打磨点中间向前一定距离处会出现聚集点,且不同高度聚集点位置不用;多点打磨空间粉尘浓度是单点打磨的2~3倍,且最大值高达45.73mg/m3,远高于国家卫生标准;求出的多尘源打磨作业粉尘扩散模型平均误差为14.67%,具有一定可靠性,可用于后续对打磨车间粉尘防护技术和空间优化布置的研究。

    Abstract:

    For improving the current situation of excessive dust concentration in the places of mobile grinding, this thesis, based on the research background of CRCC Changke grinding workshop, establishes an unsteady single-dust diffusion model with the guidance of Gaussian diffusion model. The liner regression method is also used to investigated rules on the diffusion of multi-point dust interactions. It makes a comparative analysis of the data on the dust concentration, in single point or multi point, which varies with the height. And combined with the equation for Groundwater Flow and the method of Gradient Decent, it finds out the coefficient of particle diffusion and multipoint dust interactions. The result shows that a gathering point would form between any two grinding points and it may also change with altitude. The dust concentration of the multi-point grinding is 2 to 3 times of the single point grinding, and the maximum value is up to 45.73 mg/m3, which is higher than the standard of the state health; The average error of the dust diffusion model is verified as 14.67% on average, and it can be used for subsequent research on the technology of protection from the dust and workshop spatial structure.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文
历史
  • 收稿日期: 2019-09-07
  • 最后修改日期: 2019-11-11
  • 录用日期: 2019-11-21
  • 在线发布日期:
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭