+高级检索
钢筋桁架楼承板-U形钢组合梁 不同抗剪连接方式的受弯性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Flexural Behavior of U-shaped Steel-concrete Composite Beams with Steel-bars Truss Deck in Different Shear Connectors
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    为了合理利用在装配式钢结构建筑中应用广泛的钢筋桁架楼承板,将钢筋桁架的 下弦钢筋焊接于U形钢梁的上翼缘作为一种新型的抗剪连接件,设计了4根采用钢筋桁架、角 钢、栓钉及其组合抗剪连接方式的简支U形钢-混凝土组合梁,并对其进行了静力试验研究和 有限元分析,考察了不同抗剪连接方式对其正截面受弯性能的影响. 试验结果表明:试件的破 坏形态为整体弯曲破坏和端部滑移破坏;仅采用钢筋桁架作为抗剪连接件的试件不能达到完 全抗剪连接,可再配置适量栓钉以提高其组合作用;采用钢筋桁架与栓钉作为组合抗剪连接 方式的试件的抗剪连接性能优于采用钢筋桁架与角钢作为组合抗剪连接方式的试件. 同时运 用 ABAQUS对试件进行了有限元分析,有限元分析的受弯承载力值与试验值吻合较好 . 最后 在试验研究和有限元分析的基础上,基于全截面塑性理论,提出了完全抗剪连接的钢筋桁架 楼承板-U形钢组合梁在正弯矩作用下的受弯承载力计算公式.

    Abstract:

    To make good use of the widely used steel-bars truss deck in assembled steel structure buildings, the bottom rebar of the steel truss was welded to the upper flange of U-shaped steel beam as a new shear connector in this study, and the experimental study and finite element analysis were conducted on four designed specimens with different shear connectors, i.e. steel truss, angle steel, studs and their combination. The test results showed that the failure modes included bending failure and slip failure; the specimen with steel truss as shear connector can not achieve the full shear connected composite beams, and some studs can be configured to improve its composite action. The shear performance of the specimen with steel truss and stud as combined shear connector was better than that of the specimen with steel truss and angle steel as combined one. Then, finite element analysis was conducted via ABAQUS software, and the ultimate bending capacity of finite element analysis was in good agreement with the ex? perimental one. Based on the experimental and finite element analysis study, a calculation formula of ultimate bend? ing capacity of the U-shaped steel-concrete composite beam with truss deck under positive bending moment was de? rived based on the plasticity theory

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

胥兴 ,程睿 ,刘吉春 ,崔佳 ,黄宗明 ,.钢筋桁架楼承板-U形钢组合梁 不同抗剪连接方式的受弯性能[J].湖南大学学报:自然科学版,2022,49(1):42~50

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2022-03-04
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭