+高级检索
基于放电沉积的金刚石磨粒层制备实验研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Experimental Study of the Fabrication of Diamond Abrasive Layer by Electrical Discharge Machining
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    提出将电火花沉积技术用于金属材料/非金属材料之间的沉积,通过制备一种含有超硬磨粒金刚石的压缩粉体电极,采用放电沉积工艺实验将超硬磨粒金刚石与电极中的其他金属材料一起沉积到基体母材表面上,然后通过扫描电镜观察与分析,沉积层中的金刚石磨粒形状较好,分布较均匀,具有磨粒层的基本要素.实验结果表明,采用电火花放电沉积能制备金刚石磨粒层.

    Abstract:

    Electrical Discharge Machining(EDM) deposition technology was proposed to fabricate an abrasive layer with a specially designed compact electrode. Co powders, Cu powders and diamond grains were compressed and sintered as a compact electrode, and then the powders in the compact electrode were deposited on the surface of the workpiece to form an abrasive layer in the EDM method. The good shape of diamond grains were found in the deposited abrasive layer by SEM scanning, and elements Co and Cu were also found in the deposited layer. The experiment result has shown that it can be used to fabricate diamond abrasive layer in the EDM method.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

余剑武,廖玉山,尚振涛,盛晓敏,万隆,刘小磐.基于放电沉积的金刚石磨粒层制备实验研究[J].湖南大学学报:自然科学版,2010,37(11):36~39

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭