+高级检索
增强材料的微观结构对环氧胶粘剂性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Study of the Performance of Epoxy Adhesive Modified by Reinforced Material with Different Microstructures
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    分别采用具有不同微观结构的增强材料纳米二氧化硅(nanoSiO2,零维)、钛酸钾晶须(PTW,一维)和纳米有机蒙脱土(OMMT,二维)增强增韧改性环氧树脂胶粘剂,对比研究了3类增强材料对环氧胶粘剂的粘接强度、表观粘度、浇铸体冲击韧性和耐热性能的影响.结果表明:当分别加入2%,6%和6%(w/w)的nanoSiO2,PTW和OMMT时,胶粘剂的综合力学性能和耐热性有显著增加;当添加量分别为2%时,胶液(A组分)表观粘度明显下降.3种增强材料的改性效果为:OMMT>PTW>nanoSiO2.

    Abstract:

    This paper presented a comparative study of different samples of adhesive strength, viscosity, impact strength and thermal of properties, which respectively use nanoSiO2(zerodimensional), potassium titanate whiskers(onedimensional) and nanoorganic montmorillonite(twodimensional) modified epoxy resin adhesive. Experiment results have shown that three kinds of reinforced materials can effectively improve the overall performance of adhesive. When the content of nanoSiO2, PTW and OMMT are 2%,6% and 6%,the mechanical properties and heat resistance are significantly increased. When the content of nanoSiO2, PTW and OMMT are 2%, the apparent viscosity of the glue (A component) decreases.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

黄凯兵,任丹凤,王建,赵上元.增强材料的微观结构对环氧胶粘剂性能的影响[J].湖南大学学报:自然科学版,2010,37(12):61~65

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭