+高级检索
钢管结构法兰连接节点抗弯承载性能的试验研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Experimental Study on Flange-plate Connections of Steel Tubular Structures under Bending Moments
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    研究了钢管结构法兰连接节点的抗弯承载性能.通过试验方法,采用螺栓应变测量装置,对含4种基本形式的法兰连接节点的试件进行四点弯加载试验,考察了在节点受弯过程中螺栓和法兰板的受力特性.试验得到了其屈服荷载与极限荷载,并且与相应的有限元分析结果吻合良好.试验结果表明,法兰连接节点的受拉区存在明显的撬力作用,刚性法兰连接节点的撬力作用小于柔性法兰连接节点.法兰连接节点的安全储备约为1.2.

    Abstract:

    The bending load performance of flange-plate connections in steel tubular structures was studied. By using experimental methods and related bolt strain measurement device, four specimens containing different types of flange-plate connections were four-point bended with loading instruments. The mechanic features of bolts and flange-plates were monitored. The yield loading capacity and ultimate loading capacity of the connections were found and compared with the results obtained in the FEM method. It has been proved that they are identical with each other. The experiment results have revealed that the prying forces in the tensile region of flange-plate connections do exist, and the prying action of connections with a stiffener is stronger than that of connections without a stiffener. The safety margin of the connections is approximately 1.2.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

王元清,宗 亮,石永久.钢管结构法兰连接节点抗弯承载性能的试验研究[J].湖南大学学报:自然科学版,2011,38(7):13~19

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭