+高级检索
拉索预应力折线型立体桁架拱布索方案研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Research on the Arrangement Styles of Cables for Pretensioned Folded Line Type 3D-trussed Arch
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    针对折线型立体桁架拱结构,提出了4种拱平面内的布索方案,研究了4种方案下预应力拱结构的静力及稳定性能,分别从结构位移的减小、索初始预拉力值的高低、水平支反力的降幅、杆件内力分布的均匀性及结构稳定性的提高5个方面与未布索立体桁架拱作了综合对比.结果表明,按照桁架拱在极限荷载作用下的屈曲形态布置撑杆拉索能够最有效地改善拱的静力性能,提高其稳定极限承载力.另外,由对预应力桁架拱的失稳模态分析发现,拉索通过撑杆对结构施加预应力能更有效地约束结构的整体变形.

    Abstract:

    For the folded line type three-dimensional (3D) trussed arches, four arrangement styles of cables in the arch plane were presented. The static and stability property of the pretensioned 3D trussed arch in those four arrangement styles was studied. The numerical results including the decrease in structural displacement, the initial tensile force of cables, the reduction in horizontal reaction force, the uniformity of distribution of member forces and the improvement of structural stability were compared with those of the corresponding 3D-trussed arch, and it has been shown that the mechanical properties of the arch can be greatly improved with the arrangement style where the struts and cables were arranged according to the buckling shape of the arch subjected to the ultimate load. In addition, the analysis results of the instability modes of the pretensioned 3D-trussed arch indicate that the global deformation of the arch can be controlled effectively by introducing struts to the prestressing system.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

贺拥军,章小桐,周绪红.拉索预应力折线型立体桁架拱布索方案研究[J].湖南大学学报:自然科学版,2011,38(8):7~12

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭