+高级检索
混合动力镍氢动力电池参数辨识
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Parameter Identification of MH/Ni Power Battery in Hybrid Electric Vehicle
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    为实现电池SOC(State of Charge)的精确估计与提高电池模型的精确性,采用等效电路模型PNGV电池试验手册中的标准电池模型,基于辅助变量法和最小二乘法相融合的方法提出了混合动力镍氢动力电池在线参数辨识方法,并利用MATLB/SIMULINK建立电池模型.仿真分析结果显示,所建立的电池模型电压最大误差为4.2 V,平均误差为0.57V,SOC的估计最大误差为0.048,平均误差为0.011,能很好地拟合真实数据.

    Abstract:

    To realize the accurate estimation of battery SOC and increase the precision of battery model, by inoculating standard battery model from equivalent circuit model PNGV battery test manual and based on instrumental variable technique and least squares technique, an online hybrid power metal hydride electric batteries parameters estimation algorithm was proposed to establish battery model using MATLB/SIMULINK. Simulation analysis has shown that the maximal error of battery model voltage is 4.2 V, the mean error is 0.57 V, and the maximal error of the accurate estimate of SOC is 0.048. The mean error is 0.011. It can follow the true data well.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

朱浩, 钱承, 谢煜冰,李磊.混合动力镍氢动力电池参数辨识[J].湖南大学学报:自然科学版,2011,38(8):19~23

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭