+高级检索
渡槽模型实测模态合成的研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Research on the Modal Synthesis of Aqueduct Model
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    分别对渡槽模型的桩及槽墩两部分进行了模态实测.为了能把两个部分的实测结果合成一个整体,并且能在实测中最大限度地减少对桩中已安装传感器的破坏,利用模型的对称性以组合系统的频响特性、结构的位移协调条件,推导出简单易行振型合成方法,实现了对桩模态与槽墩模态的组合.实测组合结果与有限元计算结果基本吻合,从而验证了该方法在实际工程中的可行性.

    Abstract:

    The modal experiments a single pile and a pier were implemented. In order to synthesize the two parts of the experiment results into a whole and minimize the destruction, the sensors were installed on the pile in the experiment. A simple modal synthesis method has been derived. The first is the symmetry of the model, the second is the theory of frequency response characteristics of composite systems, and the third is structural displacement harmonized condition. This method realizes the combination of the pile -pier modal. At the same time, the finite element calculation results are consistent with the experiment results, which validates the feasibility of the method proposed.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

李正农 , 卢 剑 , 朱旭鹏 , 李继孟 , 张盼盼 .渡槽模型实测模态合成的研究[J].湖南大学学报:自然科学版,2011,38(9):1~6

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭