+高级检索
基于AMESim和LS-SVM的高压共轨系统建模与仿真
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Study of the Modeling and Simulation of High Pressure Common Rail Based on LS-SVM and AMESim
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    为了提高高压共轨压力预测模型的精确性,采用AMESim软件建立了柴油机高压共轨仿真模型.利用灰色关联分析方法对共轨压力影响因素进行理论分析计算,并确定了高压共轨压力预测模型的输入输出变量;然后利用最小二乘支持向量机对共轨压力与主要的影响因素之间的数值关系进行了智能拟合,并利用自适应粒子群算法优化了最小二乘支持向量机的初始参数.通过20个预测样本的检测,最小二乘支持向量机模型的最大预测误差为0.079 1,平均相对误差降至0.039 6,其性能明显优于BP神经网络.

    Abstract:

    To increase the precision of high pressure common rail forecast model, the modeling of high pressure common rail diesel engine based on AMESim was introduced. On this basis, grey relational theoretical analysis was used to analyze the multi-parameter system and calculation to determine the input and output variables of the predictive model. Adaptive weighted Particle Swarm Optimization algorithm was applied to the optimization of initial parameters of least square support vector machine. Through the examination of 20 forecasting samples, the maximal error of the forecast model is 0.079 1, and the average relative error is reduced to 0.039 6 by the least square support vector machine, which is far superior to commonly used empirical formula and neural network.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

邓元望,元野,周飞,陈可亮.基于AMESim和LS-SVM的高压共轨系统建模与仿真[J].湖南大学学报:自然科学版,2012,39(1):47~51

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭