+高级检索
基于滑模变结构的PMSM的直接转矩控制
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Direct Torque Control of PMSM Based on Sliding Mode
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    分析了永磁同步电机(PMSM)数学模型,设计了一种新颖的基于空间矢量脉宽调制技术的直接转矩控制(SVM-DTC)系统.利用两个PI控制器分别调节磁链和转矩实现对电机空间矢量中转矩和磁链2分量的解耦,同时,采用基于转子位置和定子电流的定子磁链估算方法观测定子磁链,并设计滑模变结构无速度传感器来估算转子位置.仿真与实验结果表明,所提出的方法能有效地估算定子磁链与转速,减小电磁转矩和定子磁链脉动,从而使系统具有很好的动、静性能.

    Abstract:

    Based on the analysis of the mathematical model of permanent magnet synchronous motor (PMSM), a new direct torque control system based on space vector pulse width modulation technique (SVM-DTC) is proposed. The stator flux and torque were regulated by PI controllers to decouple motor space vector in the two components of stator flux and torque. Meanwhile, a stator flux estimation method based on rotor position and stator current was used and sensorless was designed to estimate the rotor position. Simulation and experiment results have shown that the proposed method can effectively estimate the stator flux and reduce the electromagnetic torque and stator flux ripple, so the system has good static and dynamic performances.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

黄守道,徐振宇,肖磊,陈自强.基于滑模变结构的PMSM的直接转矩控制[J].湖南大学学报:自然科学版,2012,39(1):52~56

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭