+高级检索
铝合金挤压型材淬火模拟研究及工艺参数的改进
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Simulation Study of the Quenching Process and Parameter Improvement of Aluminum Extrusion
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    为了解决“U”形铝合金型材在喷水淬火过程中因冷却速度不均匀而导致型材截面变形的问题,基于FLUENT和ANSYS-WORKBENCH软件平台,建立了“U”形挤压型材在喷水冷却过程的有限元模型.分析了3种不同喷嘴速度大小方案下型材淬火冷却过程的温度场、残余应力和变形等变化规律.结果表明:经工艺参数优化后,型材截面上不同部位喷嘴速度大小设计更合理,淬火冷却过程中型材的温度场和等效应力分布更均匀,最大等效应力最小,型材的变形最小.通过有限元分析能较好地改进型材淬火冷却过程中喷嘴速度大小及分布,为实际挤压生产过程提供指导.

    Abstract:

    In order to address distortion caused by cooling speed for aluminum profile in water spray quenching processing, a finite element model for cooling process in water spray of the extruded aluminum profile was developed on the basis of the FLUENT and ANSYSWORKBENCH software platform. The temperature field, the residual stress and the strain of cross section in quenching processing were analyzed under three runs with different water spray speeds. After process parameters were optimizated, the results showed that the nozzle size speed of the section profiles in different parts was more reasonable, and the distribution of temperature and equivalent stress was more uniform. It presented the smallest equivalent stress and strain of cross section. Finite element analysis can help improve nozzle distribution and spray velocity in the quenching process of the aluminum profile, which can provide guidance for practical production in industry.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

李落星,胡理中,刘志文,姚再起.铝合金挤压型材淬火模拟研究及工艺参数的改进[J].湖南大学学报:自然科学版,2013,40(2):71~76

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭