+高级检索
添加B2O3对0.7CaTiO3-0.3NdAlO3陶瓷烧结及其介电性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Effect of Adding B2O3 into 0.7CaTiO3 -0.3 NdAlO3 Ceramics on its Sintering and Performance
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    0.7CaTiO3-0.3NdAlO3(以下简称为CTNA30)是应用广泛但烧结温度较高的微波介质陶瓷.本文通过添加不同量的B2O3来降低CTNA30陶瓷的烧成温度,并用XRD,SEM和矢量网络仪分析等表征方法,确定了B2O3的添加量对CTNA30烧结温度、物相组成、微观结构和介电参数的影响.添加B2O3可以显著地促进CTNA30陶瓷体的烧结,其中添加2%B2O3的CTNA30陶瓷,烧结温度可降到1 300 ℃,介电常数εr为49.99,品质因数Qf为57862GHz,频率温度系数τf为5.39×10-6/℃.

    Abstract:

    0.7CaTiO3-0.3NdAlO3 (CTNA30) ceramics is a kind of widely used microwave dielectric ceramics with high sintering temperature. In this article, various contents of B2O3 were introduced into CTNA30 to decrease its sintering temperature. Then, the influences of B2O3 content on the sintering temperature, morphology, microstructure and microwave dielectric properties of CTNA30 were investigated with x-ray diffract meter (XRD), environmental scanning electron microscope (ESEM) and vector network analyzer. The results showed that ceramics could be sintered more easily when doped with B2O3. Moreover, the sintering temperature could be decreased to 1 300 ℃ from 1 500 ℃ when doped with 2wt% B2O3 and the corresponding εr reached the maximum 49.99, Qf about 57 862 GHz, which decreased with the increase of doping level, and τf was about 5.39×10-6∕℃

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

李玉平,沈冠群,袁昂,陈功田.添加B2O3对0.7CaTiO3-0.3NdAlO3陶瓷烧结及其介电性能的影响[J].湖南大学学报:自然科学版,2014,41(7):40~44

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2014-07-23
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭