+高级检索
高电化学性能聚苯胺纳米纤维/石墨烯复合材料的合成
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Synthesis of High Electrochemical Performance of PANI-F/GNs Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    聚苯胺纳米纤维(PANI-F)与氧化石墨烯(GO)经组装后,进行水热反应,制备了PANI-F/rGO (还原的氧化石墨烯)复合材料.利用扫描电子显微镜(SEM),傅立叶红外光谱仪(FT-IR),X射线粉末衍射仪(XRD)对样品形貌和结构进行表征;同时,借助循环伏安(CV),恒电流充放电(GCD),交流阻抗(EIS)对样品的电化学性能进行了测试.结果表明:rGO均匀包裹在PANI-F表面,在1 M H2SO4的电解液中,当电流密度为1 A/g时,PANI-F比电容为378 F/g,而PAGO10(PANI与GO 的质量比为10∶1),比电容达517 F/g;且当电流密度10 A/g时,PAGO10的比电容为356 F/g,而PANI-F的比电容仅为107 F/g.

    Abstract:

    A polyaniline fibers (PANI-F)/ reduced graphene oxide (rGO) composite was synthesized by using self-assembly of PANI-F and GO followed by hydrothermal reaction. The morphology and structure of samples were characterized with scanning electron microscopy (SEM), Fourier transform infrared spectrometer (FT-IR)and X-ray diffraction (XRD).The electrochemical properties were characterized with cyclic voltammetry (CV), galvanostatic charge/discharge(GCD) and electrochemical impedance spectrum(EIS). It showed that the rGO was homogeneously coated on the surfaces of PANI-F, and a high specific capacitance of 517 F/g (based on PAGO10 composite) was obtained at a current density of 1 A/g, compared with 378 F/g for PANI-F. Most of all, a high specific capacitance of 356 F/g was obtained at a current density of 10 A/g, compared with 107 F/g for PANI-F.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

钟文斌,李士超.高电化学性能聚苯胺纳米纤维/石墨烯复合材料的合成[J].湖南大学学报:自然科学版,2015,42(6):41~46

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-08-13
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭