+高级检索
胶带输送巷道粉尘浓度分布的数值模拟及实验研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Numerical Simulation and Experimental Research on Dust Concentration Distribution in Belt Conveyer Roadway
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    为了改善胶带输送巷道粉尘浓度超标的现状,探索影响粉尘浓度分布的主要因素,根据相似原理,结合气固两相流的运动方程,导出了模拟胶带输送巷道粉尘运动的相似准则数,建立了胶带输送巷道相似模型,运用计算流体力学的Fluent软件对胶带输送巷道相似模型粉尘浓度分布进行数值模拟,并与相似实验数据对比分析,模拟结果与实验数据基本吻合.研究结果表明,巷道平均风速及胶带运行速度是影响粉尘浓度分布的两大主要因素.巷道平均风速为0.15~0.60 m·s-1时,风速越大,粉尘浓度越低.胶带运行速度为1~2.5 m·s-1时,运行速度越大,粉尘浓度越高.

    Abstract:

    In order to improve the current situation of dust concentration exceeding the limits in belt conveyer roadway,to explore the main influencing factors of dust concentration distribution, according to the similarity theory and the gas-solid two-phase flow equation motion, a similarity model device was designed for the specific situation in belt conveyer roadway. Fluent, which is a software of computational fluid dynamics, was used to analyze the dust concentration distribution in belt conveyor roadway of the similar model. Compared with similar experiment data analysis, the simulation result was consistent with the experimental data. The results show that the average wind speed in the roadway and the speed of the belt are the two main factors affecting the dust concentration distribution. When the average wind speed of the roadway is 0.15 m·s-1 ~ 0.60 m·s-1, the greater the wind speed, the lower the dust concentration. When the Tape speed is 1~ 2.5 m·s-1, the greater the speed, the higher the dust concentration.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

陈举师,蒋仲安,王明.胶带输送巷道粉尘浓度分布的数值模拟及实验研究[J].湖南大学学报:自然科学版,2015,42(6):127~134

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-08-13
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭