+高级检索
串囊式充气锚杆在砂土中的模型试验研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Model Test Study on Bladder-type Inflatable Anchor
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    串囊式充气锚杆是基于单囊充气锚杆的改进与创新,为研究其极限抗拔承载力和位移的影响因素,通过对串囊式充气锚杆进行一系列室内模型试验,获得了其相应的抗拔承载力—位移曲线.试验结果表明影响串囊式充气锚杆极限抗拔承载力和位移的主要影响因素有:充气压力、埋置深度、橡胶膜长度和厚度、气囊个数、气囊之间的间距等,这些因素对串囊式充气锚杆的影响程度各不相同.通过与单囊充气锚杆的对比试验,得出在相同条件下,串囊式充气锚杆的极限抗拔承载力较单囊充气锚杆增加了1.2~1.7倍,极限位移仅为单囊充气锚杆的37%~66%.串囊式充气锚杆在增大承载力的同时,有效的控制了位移.

    Abstract:

    Bladder-type inflatable anchor is the improved and innovated inflatable anchor. In order to analyze the influencing factors of the ultimate up-lift bearing capacity and ultimate displacement, a series of laboratory model tests were carried out on bladder-type inflatable anchor. From experiments, we obtained uplift capacity-displacement curves. Test results have shown that the influencing factors include inflation pressure, embedded depth, length and thickness of rubber membrane, number of airbags, the distance between airbags and so on. However, the influence degree is different on bladder-type inflatable anchor. Through the contrast test with single capsule inflatable anchor, it is concluded that, under the same conditions, the ultimate up-lift bearing capacity of bladder-type inflatable anchor increases 1.2~1.7 times, and the ultimate displacement is 0.37~0.66 times of the single capsule inflatable anchor, which controls the displacement effectively.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

彭文祥,张旭, 莫建军,黄阳艳,全永庆.串囊式充气锚杆在砂土中的模型试验研究[J].湖南大学学报:自然科学版,2015,42(7):93~99

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-08-13
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭