+高级检索
波形钢腹板抗剪性能的研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Research on Shear Mechanical Property of Corrugated Steel Webs
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    为了研究波形钢腹板的抗剪受力性能,首先设计了4根波形钢腹板H型钢梁并进行屈曲加载试验,掌握了波形钢腹板屈曲的基本特征;统计国内外已建波形钢腹板组合桥的波形钢腹板尺寸参数、并对弹性屈曲强度的计算进行了分析,建议了弹性屈曲强度简化计算公式和适用范围;考虑局部弹性屈曲强度要小于整体弹性屈曲强度等参数范围,合理选取一批试验数据对Yi、聂建国等提出的波形钢板非线性剪切屈曲强度计算公式进行了对比分析,并通过ANSYS有限元程序对本文部分试验结果进行了分析验证.结果表明:波形钢腹板主要承担剪力且剪应力沿高度均匀分布;几何初始缺陷对其剪切屈曲强度的影响较明显;在工程应用范围内,文中建议的弹性屈曲强度和非线性剪切屈曲强度公式与试验值和有限元分析值吻合较好,精确度较高,可供工程设计参考.

    Abstract:

    To study the shear mechanical property of corrugated steel webs, four H-shaped steel beams with trapezoidal corrugated steel webs were designed and tested to obtain the shear behavior of corrugated steel webs. In addition, the elastic bucking strength of the corrugated steel webs was discussed according to statistical data of their dimensions for the as-built PC composite box girders around the world. Then, we proposed the simplified computational formulae and the corresponding scope. Furthermore, considering that the local elastic bucking strength is less than global elastic bucking strength, the formulae for calculating the nonlinear shear strength presented by Yi and NIE were studied on the basis of some test results, and the test results were verified by comparing the analysis results of ANSYS software. It is concluded that the shear force is mainly borne by the corrugated steel webs and the distribution of the shear stress along the height of the web is uniform. And the shear capacity of corrugated steel webs will be greatly affected by the initial imperfections. What is more, the proposed computational formulae for the elastic bucking strength and nonlinear shear strength are in perfect accordance with the model test results and the numerical analysis results, so they can provide a reference for practical structural design.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

李立峰,侯立超,孙君翠.波形钢腹板抗剪性能的研究[J].湖南大学学报:自然科学版,2015,42(11):56~63

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-12-07
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭