+高级检索
二氧化碳管道输送过程管径设计分析
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Pipe Diameter Design and Analysis of Carbon Dioxide Pipeline Transportation Process
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    根据影响管径设计的因素,从质量流量、管长和压降3个方面对Rubin管道设计模型进行分析,根据分析结果建立相应的数值模型;使用MIT管道设计模型验证所建数值模型的可靠性;在此基础上从管道总资本成本和中间加压站成本两方面分析管道经济成本.研究结果表明,模型各变量的变化规律及相应数值模型类型均与验证模型相同,且有很好的相关性(其决定系数R2均大于0.970).

    Abstract:

    According to the factors affecting the diameter size (i.e. mass flow rate, pipeline length and pressure drop), this article analyzed the pipeline design model of Rubin from the three aspects and established their corresponding numerical models. Furthermore, the reliabilities of the proposed numerical models were validated by another pipeline design model (i.e. the MIT model). Besides, the economic cost of CO2 pipeline transportation was also estimated through the cost analysis of the total pipeline capital investment and the additional pressure station cost. The research result shows that: (i) the proposed models share the same variable change rules and numerical model types with the validation model, and (ii) all of them have high correlation with numerical models (their correlation coefficients R2 are larger than 0.970). The pipeline design and cost analysis proposed in this work have some reference value for the process design of CO2 pipeline transportation.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

高瑞民,赵晓兰,陈光莹,梁志武,那艳清.二氧化碳管道输送过程管径设计分析[J].湖南大学学报:自然科学版,2015,42(12):95~99

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-12-07
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭