+高级检索
基于纵向滑移率均衡的车道偏离辅助控制研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Research on Balanced Longitudinal Slip Rate Based Lane Departure Assistance
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    提出了一种无压力闭环的差动制动实现车道偏离辅助的控制方法.根据车辆和驾驶员参考模型确定纠正车道偏离所需的目标横摆角速度.采用滑模算法设计横摆角速度跟踪控制器,确定附加横摆力矩.基于纵向滑移率均衡设计车轮制动压力调节策略,限制车轮最大滑移率,以提高车辆横向稳定性.设计模糊控制器对压力建立过程进行伺服控制.在Carsim/Labview-RT联合仿真平台上对提出的方法进行硬件在环仿真试验,试验结果表明,所提出方法能有效避免车辆偏离车道,鲁棒性强,且车辆横向稳定性好.

    Abstract:

    This paper proposed a new differential braking without close-loop control of braking pressure.The expected yaw rate to correct vehicle trajectory was determined with a reference 2-DOF vehicle model and driver model.A slip model algorithm was adopted for the close-loop control of yaw rate to compute the additional yaw moment.A braking strategy based on balanced longitudinal slip rate was presented, which improves the lateral stability of vehicle by limiting the max absolute longitudinal slip of wheels.A fuzzy controller was developed for the servo control of braking pressure.Experiments were done on hardware in loop (HIL) simulation platform based on Carsim and Labview RT.The results have shown that the presented method can effectively avoid lane departure accidents and work robustly under various operation conditions, and meanwhile, the lateral stability is maintained.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

黄 智,刘 剑,吴乙万.基于纵向滑移率均衡的车道偏离辅助控制研究[J].湖南大学学报:自然科学版,2016,43(2):1~7

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-03-02
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭