+高级检索
基于Morris法分析的液压参数对互联悬架的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Influence of Hydraulic Parameters on Hydraulically Interconnected Suspension Based on Morris
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    针对液压参数对液压互联悬架输出响应影响强度大小的问题,在Matlab中建立了液压互联悬架半车侧倾耦合频域模型,根据系统的传递函数和路面输入得到了垂直和侧倾输出加速度谱密度并将其与传统悬架进行对比,分析对比结果.采用Morris灵敏度分析方法计算得到各液压参数的灵敏度值并进行灵敏度排序.结果表明,由于在侧倾振动中液压油频繁地流进和流出蓄能器,蓄能器参数及与蓄能器连接的阻尼阀压力损失系数对侧倾振动模态有较大影响;与作动器上下腔连接的阻尼阀压力损失系数对垂直振动模态有较大影响,所得结果为进一步的悬架优化中设计变量的选取提供了理论依据.

    Abstract:

    To solve the problem of how the degree of hydraulic parameters influences hydraulically interconnected suspension response, a hydraulically interconnected suspension roll frequency domain model was set up by using the Matlab.Bounce and roll acceleration output spectral densities were obtained and compared with the traditional suspension,and the results were analyzed.By applying the method of local sensitivity analysis called Morris, the influence degree of hydraulic parameters on bounce response and roll response was obtained.The results indicate that, because the liquid flows in and out of the accumulator, the accumulator and the valves connected to it have a great impact on the roll vibration model, and the valves connected to the hydraulic chambers have a great impact on the bounce vibration model.This paper provides a theoretical basis for suspension optimization.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

周 兵,黄晓婷,耿 元.基于Morris法分析的液压参数对互联悬架的影响[J].湖南大学学报:自然科学版,2016,43(2):70~76

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-03-02
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭