+高级检索
CVT锥轮推力平衡模型及影响因素研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Research on Pulley Thrust Balance Model of CVT and Impact Factors
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    为提高无级变速器速比控制的精度与稳定性,研究了主从锥轮推力的关系及其影响因素.采用理论分析与试验验证相结合的方法,建立了主从锥轮推力比的数学模型,通过台架试验验证了模型的正确性,并且,通过台架试验研究了速比、转矩比、输入转矩与主动轮转速平衡推力比的影响.结果表明,平衡推力比与主从锥轮工作包角的比值成比例关系;推力比与速比呈单调递减的关系;同一速比下,输入转矩越大,推力比越大;推力比随转矩比的增大而线性增大,针对同一转矩比,最大转矩值越大,推力比就越小;主动轮转速对推力比的影响可以忽略.本文研究了推力比的平衡机理,为速比的精确控制提供了理论与试验依据.

    Abstract:

    In order to improve the speed ratio control accuracy and stability of Continuously Variable Transmissions (CVTs), the thrust balance impact factors were studied and the relationship between the primary pulley thrust and the secondary pulley thrust was analyzed. Theoretical analysis and experiment verification methods were utilized. A math model for thrust ratio was developed. The impact on balance thrust ratio from speed ratio, torque ratio, input torque and primary speed was investigated in test bench experiment. The results are as follows: 1) the balance thrust is proportional to the ratio between the primary and secondary working wrap angles; 2) The thrust ratio becomes smaller when the input torque is larger under the same speed ratio condition; 3) The thrust ratio increases when the input torque ratio becomes larger; 4) The thrust becomes smaller when the maximum input torque becomes larger under the same torque ratio condition; 5) The impact from primary speed can be ignored. This paper explains the balance mechanism of thrust ratio and provides a theoretical and experimental basis for controlling speed ratio accurately.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

张飞铁,王建德,周云山,张明华. CVT锥轮推力平衡模型及影响因素研究[J].湖南大学学报:自然科学版,2016,43(4):24~30

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-04-26
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭