+高级检索
基于网格映射的车身覆盖件精细模面设计研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Research on an Accurate Design Method of Auto panel Stamping Die Based on Mesh Mapping Algorithm
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    由于机台和模具变形、制件减薄等因素的影响,造成合模时模面间隙与板料成形零件厚度不一致而导致模具研合率低.针对上述问题提出了一种新的模具模面精细化补偿方法,针对该补偿方法提出了一种基于二分法的网格变量映射新算法来实现不同网格变量之间的精确映射.该设计补偿方法在工艺设计阶段即可对模具型面进行相应的变形补偿,以抵消实际模具结构变形对成形件质量的影响.应用实例表明,该映射算法在精度和速度上有较大的提高,该补偿方法能够解决模具调试阶段研合率低的问题, 大大提高了首次合模率.

    Abstract:

    Due to the impact of the elastic deformation of tools and press, and the blank thinning and other factors, the die surface gap is not consistent with the thickness distribution of the stamped part, which leads to low spot rate. With regard to the problem mentioned above, a new mesh mapping algorithm based on binary search was presented, which can realize the accurate mapping between different meshes,and then, a new methodological scheme was developed for the compensation of the die surfaces. In the early design stage, the new methodology can guide the engineer to modify the die surface, thus offsetting the influence on quality caused by the deformation of tools. Application example has shown that the new mapping algorithm not only improves the accuracy but also improves the search speed. The methodology can solve the problem of low spot rate and noticeably improve the first time contacting ratio.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

聂 昕,毛定山,王 辉.基于网格映射的车身覆盖件精细模面设计研究[J].湖南大学学报:自然科学版,2016,43(8):32~39

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-08-24
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭