+高级检索
基于波动负荷功率分析的闪变源判别方法
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Trace of Flicker Sources Based on Fluctuating Load Power Analysis
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    通过建立多闪变源电路等效模型,分析了闪变功率闪变源判别原理,构建了改进能量算子提取电压和电流闪变包络,采用改进FFT谱分析获得闪变包络参数计算闪变功率,基于闪变功率方向和幅值特性实现闪变源定位及其污染评估,提出并建立了基于波动负荷功率分析的闪变源判别方法.仿真分析和实验表明,提出方法能快速有效定位闪变源,准确评估多闪变源的污染程度,判别结果快速准确、误判率低.

    Abstract:

    Through the establishment of multi flicker sources circuit equivalent model, the theoretical background of tracing flicker sources by flicker power was analyzed. To accurately estimate flicker power, the flicker envelope parameters were obtained by using improved Teager Kaiser energy operator and the improved FFT. The direction of flicker flow was determined by the sign of flicker power, and pollution assessment was achieved with the magnitude of flicker power. The simulation analysis and experiment results show that this approach can trace flicker sources effectively and rapidly and assess the pollution level of different flicker sources accurately. The tracing results are computed fast and correctly and the misdiagnosis rate is reduced.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

高云鹏,陈 婧,李 林,滕召胜,柯盼盼.基于波动负荷功率分析的闪变源判别方法[J].湖南大学学报:自然科学版,2016,43(8):92~100

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-08-24
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭