+高级检索
抗剪加固用U形纤维布条带预应力系统设计及试验
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Design and Experiment Study of Prestressing System for U-shaped FRP Sheet in Shear Strengthening
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    针对传统纯粘贴纤维增强复合材料(FRP)抗剪加固钢筋混凝土梁技术中,FRP强度利用率低、端部极易发生剥离和被动受力等问题,自主研发了抗剪加固用U形纤维布条带预应力系统.它由锚固装置、张拉装置和转角圆钢3部分组成.详细给出了各部件尺寸的设计方法和预应力施工工艺.设计制作了适用于2层50 mm宽FRP的预应力系统,分别进行了1组直线条带的承载力试验和8组抗剪U形条带的预应力损失试验研究.结果表明:预应力系统能够有效锚固FRP并实现拉断破坏,使其强度利用率最大可达到96.1%;各部件尺寸设计方法是安全可靠的;施工工艺能够在确保FRP两侧应力的均匀性和对称性的基础上施加不同大小的预应力值;预应力系统适用于施加244.84 MPa以上预应力值的抗剪FRP,其长期预应力损失比约为15%.

    Abstract:

    In the shear strengthened reinforced concrete (RC) beams by externally bonded fiber reinforced polymer (FRP) composite, there are some main shortcomings including low fiber utilization, premature debonding, and stress hysteresis of the FRP, etc. In order to address these problems, this paper independently developed a novel prestressing system for U-shaped FRP sheet in shear strengthening, which consists of three parts: anchor device, tension device, and steel angle. The design method of component size and the prestress construction technology were presented. Furthermore, a prestressing system for 2-ply and 50-mm-wide FRP sheet was designed and manufactured. One bearing capacity test of linear FRP sheet and eight prestressing loss tests of shear-strengthened FRP strips were conducted in this system. The test results show that: the prestressing system can effectively anchor FRP and result in rupture failure; fiber strength increases up to 96.1%; design method of component size is safe and reliable; prestressing construction technology can exert different prestress values to FRP strip based on the uniformity and symmetry of the strip stress; the system is applicable to exert the prestress more than 244.84 MPa to the FRP; and the long-term prestress loss ratio is about 15%.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

刘君,周朝阳,韩殿牧原,赵波涌,任达.抗剪加固用U形纤维布条带预应力系统设计及试验[J].湖南大学学报:自然科学版,2016,43(11):47~54

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-21
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭