+高级检索
二醋酸纤维素酯接枝聚乳酸的制备及性能研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Preparation and Properties of Graft Copolymer of Cellulose Diacetate with Polylactic Acid
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    以辛酸亚锡为催化剂,二醋酸纤维素酯为接枝骨架,在真空熔融条件下通过meso-丙交酯的开环聚合反应,制备了二醋酸纤维素酯接枝聚乳酸的共聚物(PLA-g-CDA).使用FTIR, DSC和拉伸实验等多种表征手段对接枝共聚物的性质进行了表征.重点研究了原料用量、催化剂用量、反应温度、反应时间和反应氛围对单体转化率和接枝率的影响,并对接枝共聚物的成膜性、相容性和力学性能进行了评估.结果表明:真空反应环境下,原料meso-丙交酯与二醋酸纤维素酯的投料比为4∶1,催化剂辛酸亚锡用量为二醋酸纤维素酯质量的5%,反应温度140 ℃,反应时间30 min时,产物的接枝率达到72%.随着PLA接枝率的升高,PLA-g-CDA更容易成膜,相容性得到改善,力学性能也得到增强.

    Abstract:

    The grafting copolymer (PLA-g-CDA) was prepared by using Sn(Oct)2 as catalyst and grafting meso-lactide onto the cellulose diacetate in the vacuum melting environment. The copolymer was characterized using FTIR, DSC and stretching test. The effects of feed weight ratio, catalyst content, reaction temperature, reaction time and reaction atmosphere on the monomer conversion and grafting ratio were examined. The film compatibility and mechanical properties of the grafting copolymer were then evaluated. The results showed that in the vacuum reaction environment, feed weight ratio of meso-lactide and cellulose acetate was 4∶1, catalyst content was 5%, reaction temperature was 140 ℃, reaction time was 30 min, and grafting rate of the product was higher. With the increase of PLA grafting rate, PLA-g-CDA was filmed more easily, and the compatibility as well as the mechanical properties was improved.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

黄凯兵,姚异渊,杨秀文.二醋酸纤维素酯接枝聚乳酸的制备及性能研究[J].湖南大学学报:自然科学版,2016,43(12):104~109

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-12-27
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭