+高级检索
基于正交误差对准的MEMS陀螺测控电路设计
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Design of MEMS Gyroscope Interface Circuit Based onQuadrature Error Alignment
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    传统MEMS(Micro-Electro-Mechanical System)陀螺的相干检测基于驱动位移和科氏位移的相位关系,依赖于陀螺的工作模式,解调载波相位抖动大,不易相位对准.为解决此问题,本文提出了一种基于正交误差对准的不依赖陀螺工作模式的相干解调系统.解调载波取自驱动电路的PLL(Phase-Locked Loop)输出,相位抖动小,仅作载波使用,不代表驱动位移信息.检测通路插入移相器,使正交误差相位滞后解调载波90°,则科氏位移信号与解调载波同相,完成检测.为验证该方法,本文研究了陀螺器件与接口电路之间的信号传递特性并进行建模,设计了锁相环、C/V(Capacitance/Voltage)转换、移相器等核心电路,实现了一款完整的MEMS陀螺测控电路.测试结果表明:陀螺驱动正常,检测正确,刻度因数为1.415 mV/(°.s),零偏不稳定度为108 °/h.结果验证了该检测方法的有效性,并为后续进一步提升性能提供了基础.该检测方法也适用于其他振动式MEMS陀螺的测控系统.

    Abstract:

    Traditional synchronous demodulation of MEMS (Micro-Electro-Mechanical System) gyroscope is based on phase relationship of drive and sense positions. This relationship depends on the work mode of gyro. Moreover,the phase jitter of drive displacement is large,which makes the phase alignment of demodulator hard. To solve these problems,a new demodulation method based on quadrature error alignment was proposed,which is independent on work mode of gyro. Demodulator reference was extracted from PLL (Phase-locked loop) output,which has low jitter. Phase shifter of sense channel was used to delay quadrature error by 90°,compared with the reference signal. Therefore,Coriolis signal and the reference were automatically in-phase,and successful demodulation was achieved. To demonstrate this method,drive-mode and sense-mode circuits were elaborately implemented,and several critical blocks were care fully de signed. The demodulation of MEMS gyro shows that the vibration oscillation is stable and the operation of sense channel is correct. The scale factor is 1.415 mV/(°·s),and the bias instability is 108°/h. Moreover,the measurement results verify the validity of the demodulation method,providing solid foundation for further research. The method is also applicable to other vibratory MEMS gyroscopes.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

陈华,来强涛,郭桂良,郭江飞,韩荆宇.基于正交误差对准的MEMS陀螺测控电路设计[J].湖南大学学报:自然科学版,2017,44(10):109~116

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-10-30
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭