+高级检索
超声波辅助球磨纳米MnxMg1-xFe2O4的制备和表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Preparation and Characterization of MnxMg1-xFe2O4 Nanoparticles by Ultrasonic-assisted Ball Milling
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    采用超声辅助球磨法制备了具有尖晶石相的纳米锰镁铁氧体MnxMg1-xFe2O4(x=0.2,0.5,0.8),并利用X射线衍射仪(XRD)、透射电子显微镜(TEM)、振动样品磁强计(VSM)、荧光强度测试仪、电导率仪对反应产物进行了一系列的表征. X射线衍射图谱表明当反应进行到60 h,单相立方尖晶石结构已经完全形成.透射电子显微镜表明样品(x=0.2)粉末的平均尺寸在25 nm左右.饱和磁化强度在x=0.5时达到最大的74.22 emu/g,并且随着x值的增大,饱和磁化强度降低.在不同实验条件下,荧光强度和电导率有着明显的不同,其变化说明超声辅助球磨对反应有显著的耦合作用.

    Abstract:

    In this paper, a series of Mn-Mg ferrites with the formula MnxMg1-xFe2O4(x=0.2,0.5,0.8) have been successfully prepared by ultrasonic-assisted ball milling approach. The characterization of the samples has been done using room temperature X-ray diffraction (XRD),transmission electron microscopy (TEM), vibrating sample magnetometer (VSM). The XRD results reveal that the formation of single-phrase ferrite is fully completed after 60 h. The TEM micrograph confirms that the average size of nanoparticles is about 25 nm. The maximum saturation magnetization of 74.22 emu/g is obtained when x=0.5, which decreases with the further Mn doping. The fluorescence measurements and electroconductivity detections reflect the reaction speed and confirm the coupling effect of ultrasonic and ball milling.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

陈鼎, 肖界魁, 詹军.超声波辅助球磨纳米MnxMg1-xFe2O4的制备和表征[J].湖南大学学报:自然科学版,2018,45(6):51~55

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-06-08
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭