+高级检索
基于超螺旋滑模及前馈补偿的智能车侧向运动控制
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Lateral Motion Control of Intelligent Vehicle Based on Combination of Super-twisting Sliding Mode and Feedforward Compensation Algorithms
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    智能车路径跟踪控制受到车辆参数摄动、场景多变等干扰,影响路径跟踪精确性,甚至引起控制系统不稳定.本文设计了考虑不确定性的二阶超螺旋滑模鲁棒控制算法,证明了控制系统的收敛性,并针对干扰问题设计了前馈补偿控制器以进一步提升控制系统的精确性.通过Carsim-Simulink联合仿真环境下的双移线、正弦路径跟踪控制,以及参数摄动情况下的路径跟踪控制,与传统一阶滑模控制对比,验证了所设计的超螺旋滑模控制器路径跟踪的精确性及鲁棒性.结果表明,面对智能车辆参数不确定、驾驶场景多变等情况,采用超螺旋滑模算法比传统滑模算法具有更好的鲁棒性和跟踪精度,超螺旋算法能有效地减弱传统滑模算法产生的方向盘抖振问题.最后,利用实车平台对进行了低速大曲率场景测试,验证所设计的超螺旋滑模算法控制器具有良好的路径跟踪精度.

    Abstract:

    Intelligent vehicle path tracking control is faced with interferences such as vehicle parameter perturbation and scene variability, which affects the accuracy of path tracking, and even causes the control system instability. In this paper, a second-order super-twisting sliding mode robust control algorithm considering uncertainty is designed, the convergence of control system is proved, and a feedforward compensation controller is designed for interference problems to further improve the accuracy of the control system. Then, to validate the accuracy and robustness of the proposed robust control algorithm, several cases including double-lane change, sine path, as well as parameter perturbation scenes, are simulated under the Carsim-Matlab/Simulink co-simulation environment, and the traditional first-order sliding mode control is selected as a comparison . The results show that, the proposed super-twisting sliding mode algorithm has better robustness and tracking accuracy than the traditional sliding mode algorithm when considering the above interferences. Meanwhile, the proposed super-twisting algorithm can effectively reduce the steering wheel buffeting problem which exists in the traditional sliding mode algorithm. Finally, the large curvature scene travelling at low speed is tested on the real vehicle platform to verify the more accurate path-tracking effect of the designed super-twisting sliding mode algorithm.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

吴晓建 ?,张明华 ,王爱春 ,关龙新 ,江会华 ,彭晨若 .基于超螺旋滑模及前馈补偿的智能车侧向运动控制[J].湖南大学学报:自然科学版,2024,(2):151~162

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2024-03-21
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭