+高级检索
混合配筋偏心受压构件正截面承载力计算理论和方法
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Calculation Theory and Method of Normal Section Bearing Capacity of Eccentric Compression Membe Steel Bars and Fiber Reinforce r Reinforced with d Polymer Bars
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    为完善钢筋和纤维增强复合材料(FRP)筋混合配筋混凝土偏心受压构件正截面 承载力计算方法,基于已有钢筋和玻璃纤维增强复合材料(GFRP)筋混合配筋混凝土偏压构 件试验,通过试验现象和破坏形态归纳出三种典型的破坏类型,进而分析各破坏类型之间的 界限,给出了相对界限受压区高度. 利用ABAQUS进行参数分析,得到混合配筋混凝土偏压构 件二阶弯矩增大系数表达式,考虑基本假定以及二阶效应的影响,推导了矩形截面偏压构件 正截面承载力计算公式 . 通过对比计算结果与试验结果,发现本文建议的计算公式具有很好 的准确性和实用性(试验值与计算值之比 Nu,t / Nu,e的均值为 0.99,标准差为 0.053),可为混合 配筋混凝土偏压构件在实际工程中的应用和推广提供一定的理论指导和设计借鉴.

    Abstract:

    To improve the calculation method of normal section bearing capacity of eccentric compression mem? ber reinforced with steel bars and Fiber Reinforced Polymer(FRP)bars,this study summed up three typical failure types,then analyzed the limit failures among each failure type,and gave relative-boundary compressive region′s height based on several tests of concrete members reinforced with steel bars and Glass Fiber Reinforced Polymer (GFRP)bars under eccentric compression. The second-order moment augmentation factor was obtained through pa? rameter analyses using ABAQUS. By considering the basic assumptions and the influence of the second-order bend? ing moment,the calculation formulas for the normal section bearing capacity of the rectangular section eccentric com? pression members were derived. By comparing the calculation results with the test results,it was proved that the cal? culation formulas proposed in this paper had good accuracy and practicability(the mean value of the ratio Nu,t/Nu,e between the experimental values and the calculated values was 0.99 and the standard deviation was 0.053),which can provide a certain theoretical guidance and design reference for the application and promotion of concrete eccen? tric compression members reinforced with FRP bars and steel bars in practical engineering.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

张望喜 ,胡彬彬 ,易伟建 .混合配筋偏心受压构件正截面承载力计算理论和方法[J].湖南大学学报:自然科学版,2022,49(5):130~138

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2022-06-06
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭