+高级检索
车身非光滑表面组合布置对气动特性影响分析
作者:

Analysis on the Influence of Non-smooth Surface Combination Arrangement on Aerodynamic Characteristics
Author:
  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
    摘要:

    为了研究非光滑表面尺寸及组合布置位置对汽车气动性能的影响.以MIRA阶梯背模型为研究对象,采用CFD与风洞试验相结合的方法对3种不同位置组合模型的气动性能进行了研究,并与光滑表面模型进行对比分析,探讨其减阻机理.结果表明,行李舱盖,车身尾部和车身底部组合布置非光滑单元体减阻效果最佳,减阻率为5.90%.非光滑表面通过改善汽车的尾部涡流,降低了模型压差阻力;同时通过改变近壁面气流的流动状态,降低了车身表面的气流速度,减小车身的摩擦阻力.

    Abstract:

    In order to study the influence of size and structure of non-smooth surface on vehicle aerodynamics, we took MIRA stepped-back model as the research object, and studied the aerodynamics of three different models by using CFD method and wind tunnel experiment. Compared with smooth surface, the principle of resistance reduction was investigated. Simulation results show that the resistance reduction effect of non-smooth units originally arranged at the trunk deck,the rear of the car and underbody, is best with the ratio of 5.90%. Non-smooth surface shows good ability to reduce model pressure drag through refining eddy of the rear of body. Meanwhile, air velocity and body frictional resistance were reduced by changing the air flow of the near wall.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

杨易, 伍奕桦, 范光辉,徐永康,聂云.车身非光滑表面组合布置对气动特性影响分析[J].湖南大学学报:自然科学版,2013,40(11):40~45

复制
历史
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭