+高级检索
开槽砌块灌孔砌体的抗剪性能试验研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Research on the Shear-resistance Behaviors of Grouted Slotted Block Masonry
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    通过对开槽砌块灌孔砌体的抗剪试件的静力试验研究,了解了开槽砌块灌孔砌体的试件开裂荷载、极限承载力、破坏过程和破坏特征.试验结果表明,开槽砌块灌孔砌体和普通灌孔砌块砌体相比,其抗剪强度得到一定程度的提高.分析了影响灌孔砌块砌体抗剪强度的多种因素,并根据Hoffman准则以及现行的规范公式,建立了开槽砌块灌孔砌体的抗剪强度公式,公式的计算结果与实验结果吻合较好.建立了开槽与不开槽砌块灌孔砌体抗剪强度的统一表达式,结果表明,将其运用在不开槽砌块的抗剪强度的计算中是可行的.

    Abstract:

    3 groups of 18 shear specimens were tested to investigate the failure processes,failure characteristics and ultimate capacity.It was shown that, due to the knocking out of the slot rib, the upper and lower core columns were connected and thus made them collaborate.As a result, the shear strength of the grouted slotted block masonry was moderately higher than that of the ordinary grouted masonry.Based on the shear mechanism of concrete block masonry, a shear strength formula of grouted slotted block masonry was built with Hoffman criteria, and a uniform shear strength formula suitable for both slotted and unslotted block masonry was proposed.The calculated values, which were generated by formula developed in this method, were in good agreement with the test results.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

黄 靓,许仲远,高 翔.开槽砌块灌孔砌体的抗剪性能试验研究[J].湖南大学学报:自然科学版,2014,41(9):54~59

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2014-10-11
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭