+高级检索
密拼叠合板拼缝构造及受力性能试验研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Experimental Study on Joint Structure and Mechanical Performance of Densely Assembled Composite Slabs
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    为了研究拼缝构造对密拼预应力钢筋混凝土叠合板受力性能的影响,提出一种增 强型密拼缝构造,并设计了3组叠合板试件的抗弯性能试验. 试验对各组试件的承载能力、刚 度、破坏形态、裂缝和变形性能进行系统性研究,并分析拼缝叠合板的拼缝传力性能和预应力 叠合楼盖的双向受力特性 . 试验结果表明:增强型密拼缝连接能够提高叠合板的垂直拼缝方 向的抗弯刚度,其承载能力接近于现浇板,同时能够保证拼缝处力的有效传递;拼缝板试件破 坏时拼缝位置的裂缝形态较好,且未发生沿叠合面的撕裂破坏;预应力叠合单板的承载能力 及变形性能均较好 . 预应力叠合楼盖的受力性能试验进一步表明:采用该种增强型拼缝构造 的叠合板能够进行双向传力,基于虚功原理建立预应力叠合楼盖极限承载力公式,极限荷载 计算值与试验值吻合较好,验证了假定的塑性铰线模式的合理性;利用条带法再次验证了预 应力叠合楼盖的双向受力性能.

    Abstract:

    In order to study the effect of joint structure on the mechanical performance of densely assembled pre? stressed reinforced concrete composite slabs, an enhanced tight joint details is proposed, and the flexural tests of three groups of composite plates were designed. The test systematically studied the bearing capacity, stiffness, failure mode, crack and deformation performance of each group of specimens, and the joint force transmission performance of the jointed laminated slab as well as the two-way mechanical characteristics of the prestressed composite floor are analyzed. The test results show that the enhanced tight joint can improve the flexural stiffness of the composite slab in the vertical direction of the joint, its bearing capacity is close to that of the cast-in-place slab, and it can ensure the effective load transmission at the joint. The crack morphology at the joint position is good when the joint plate speci? men fails, and no tear damage occurs along the composite surface. The bearing capacity and deformation performance of the prestressed composite slabs are good. The mechanical performance test of the prestressed composite floor fur? ther shows that the composite slab with the reinforced joint structure can carry out two-way load transmission. An ul? timate bearing capacity formula of the prestressed composite floor was established based on the principle of virtual work. The calculated value of the ultimate load is good in agreement with the experimental value, which verifies the rationality of the assumed plastic hinge line mode. The strip method was used to verify the two-way mechanical per? formance of the prestressed composite floor.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

何庆锋 ,胡程群 ,杨凯华 ,易伟建 .密拼叠合板拼缝构造及受力性能试验研究[J].湖南大学学报:自然科学版,2022,49(3):111~122

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2022-05-13
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭