+高级检索
小型车用压气机气动噪声分析
DOI:
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


Analysis of Aerodynamic Noise on Small Centrifugal Compressor
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    以车用压气机为研究对象,基于CFD稳态的RANS方程湍流模拟计算压气机的流场特性和宽频噪声,结果表明叶轮区域是压气机的主要噪声源.基于大涡模拟(LES)和Ffowcs-Williams & Hawkings(FW-H)方程的声比拟方法,以压气机叶轮为声源对压气机离散噪声进行预测分析.结果表明该压气机主要噪声源在叶轮区域.以压气机叶轮为声源进行仿真计算所得声压与实验值大体趋势相同,仿真值比实验值略高,误差在10%以内,表明该仿真计算方法可行,对进一步研究压气机噪声控制具有参考价值.

    Abstract:

    This paper focuses on the vehicle compressor.Firstly,the characteristics of flow field and broadband noise of compressors are calculated based on the steady state RANS equations,and the results demonstrate that the main noise source of the compressor locates in the impeller areas.Then,based on the large eddy simulation (LES) and Ffowcs - Williams & Hawkings (FW-H) equation of the acoustic analogy method,the compressor discrete noise is predicted,taking the compressor impeller as the main noise source.The results show that the main noise source of compressor locates in compressor impeller areas.In addition,by means of simulation,the sound pressure varies approximately in the same trend with the experiment value,taking compressor impeller as the main noise source.The simulation value is slightly greater than the experimental value with the error less than 10%.Therefore,it is concluded that the simulation calculation method is feasible,which provides the reference value for further study on the vehicle compressors.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

龚金科,朱咸磊,刘冠麟,黄守辉,杨迪.小型车用压气机气动噪声分析[J].湖南大学学报:自然科学版,2017,44(8):23~28

复制
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-09-20
  • 出版日期:
作者稿件一经被我刊录用,如无特别声明,即视作同意授予我刊论文整体的全部复制传播的权利,包括但不限于复制权、发行权、信息网络传播权、广播权、表演权、翻译权、汇编权、改编权等著作使用权转让给我刊,我刊有权根据工作需要,允许合作的数据库、新媒体平台及其他数字平台进行数字传播和国际传播等。特此声明。
关闭